Electrical Wiring New Construction

We Perform New Construction Electrical Wiring!

When it comes to new home wiring, Electricians Rochester, NY is the one who can provide electric repair service and install a safe and reliable electrical system. We are licensed and experienced electrical contractors. Our installed electrical system meets all local building codes and safety standards and is tailored to meet the specific needs and preferences of the home’s occupants. We install the electrical infrastructure that power all of the electrical systems and devices in a home, from lighting and HVAC systems to appliances and entertainment systems.

We have deep knowledge of calculations of electrical load and determining the amount of power needed to operate all of the electrical systems and devices in a home, and we ensure that the electrical system is designed to handle that load. Secondly, we install the wiring and conduit needed to carry electrical current throughout the home. Then the electrical panel serves as the central hub for the home’s electrical system. Then comes grounding and bonding which ensure that the home’s electrical system is properly grounded and bonded to prevent electrical shocks and other hazards. New home wiring is a complex process that requires a high level of expertise and attention to detail. By working with our licensed and experienced electrical contractors, homeowners can ensure that their new home is equipped with a safe and reliable electrical system that meets all local building codes and safety standards.

How Do We Do New Home Full Wiring?

Wiring a new home requires careful planning and attention to detail to ensure that the electrical system is safe, efficient, and meets local building codes. Following are the major steps we follow while doing full home wiring:

Plan The Electrical System – First of all, our Electricians in Rochester creates a wiring plan that includes the location of outlets, light fixtures, switches, and the electrical panel. Our plan specifies the size of the wiring and the type of circuit breaker required for each circuit.

Install The Electrical Panel – The electrical panel is the central hub of the electrical system. We install it in a location that is easily accessible and away from moisture or direct sunlight.

Install The Wiring – This is the most critical step in the process. The wires we install are always in a safe, efficient manner and secured properly to avoid damage or fire hazards. Wiring should be color-coded to identify the type of wire and its intended use.

Install Outlets & Switches – Once our team is done with the wiring process, we move forward toward the next step of outlets and switch installation according to the plan.

Install Light Fixtures – Light fixtures should be installed safely and securely, with the appropriate wiring and supports. And that’s what we always keep in mind while installing light fixtures or bulbs.

Test The System – Once the wiring and all components are in place, our team makes sure that the electrical system should be thoroughly tested to ensure that it is working properly and meets local building codes.

Obtain Final Inspection & Approval – Before the home can be occupied, we make an inspection and pass the electrical system through final inspection and approval by the local building department. It’s important to note that electrical work should only be done by a licensed electrician, who has the knowledge, experience, and equipment to do the job safely and correctly.

Wiring For Wireless

When it comes to wireless technology, wiring is generally not needed as it operates through radio waves or electromagnetic signals. However, there are still some scenarios where wiring may be involved in wireless technology. Our experts provide wiring for wireless services which include: Power, Network Infrastructure, Wireless charging devices, and much more. Overall, while wireless technology can reduce the need for wiring in certain scenarios, it still requires a wired infrastructure to support its operation.

Our Full Home Electrical Service

Our Whole home electrical service refers to the complete electrical system of a home, including the electrical panel, wiring, outlets, switches, and appliances. We always make sure that the electrical service in your home is up to code and functioning safely to avoid electrical hazards, such as electrical fires, shocks, or electrocution. Rochester electricians ensure your home’s electrical service is functioning properly, Our licensed electricians inspect and perform all necessary repairs or upgrades. Which include:

1. Electrical Panel Upgrade – If a home has an outdated or overloaded electrical panel, we upgrade it to a larger capacity to meet the electrical needs.

2. Wiring upgrades – If a home has old or damaged wiring, we prefer it to replace it to prevent electrical hazards.

3. Outlet & Switch Replacements – If the outlets and switches are not working properly or are outdated, they may need to be replaced.

4. Installation of GFCI Outlets – We install Ground Fault Circuit Interrupter (GFCI) outlets in bathrooms, kitchens, and other areas where water is present to prevent electrical shocks.

5. Surge protection – We install surge protectors to prevent damage to the electrical devices during power surges.

6. Installation of Smoke Detectors & Carbon Monoxide Detectors – We install smoke detectors and carbon monoxide detectors throughout the home to alert potential hazards.

How To Rough-In Electrical Wiring?

Rough-in electrical wiring refers to the installation of wiring before walls, ceilings, and floors are finished. Our professional electricians follow the electrical code and safety regulations when roughing-in electrical wiring to avoid any electrical hazards. We have mentioned a few steps that we follow:

Turn off the power – First of all, we turn off the power to the area where we will be working. This can be done by flipping the switch in the electrical panel.

Install electrical boxes – Secondly,we Install electrical boxes in the walls and ceilings where outlets and switches will be located. We use a stud finder to locate the studs in the walls and ceiling joists.

Run the wiring – Then we run the wiring from the electrical panel to the electrical boxes using cables. The type of cable we use depends on the wiring needs of each location. For example, a 14/2 cable is typically used for lighting, while a 12/2 cable is used for outlets.

Secure the wiring – Secure the wiring to the studs and joists using cable staples or straps. Leave at least 6 inches of wire sticking out of the electrical boxes.

Connect the wires – Then we strip the ends of the wires and connect them to the appropriate terminals on the outlets, switches, and fixtures. We use wire nuts to connect multiple wires together.

Test the connections – Most importantly, we test the connections using a voltage tester to ensure that there is no power running through the wires.

Label the wires – Then we label the wires with the appropriate circuit breaker number and location using a label maker. Once the rough-in wiring is complete, our licensed electrician inspect the work to ensure that it’s up to code and safe. We connect the wiring to the electrical panel and install the outlets, switches, and fixtures.

To Conclude:

Electricians Rochester, NY is trustworthy and reliable. We have a dedicated team of electricians who perform the tasks very dedicatedly and provide high-quality service to the clients. From installation to repair, we provide all electrical services. Contact us for more details. 

For Electrical Wiring New Construction, Call Us: